HOSE: RATED AT 3300 PSI WP (HOSE ONLY) CONSTRUCTED OF AN EXTRUDED,
SEAMLESS NYLON INNER CORE CHEMICALLY BONDED TO MULTI-LAYERS OF HIGH TENSILE
SYNTHETIC REINFORCEMENT. THESE IN TURN ARE BONDED TO AN ABRASION-RESISTANT
POLYURETHANE COVER. A STATIC DRAIN ELEMENT OF FLEXIBLE, ELECTRICALLY CONDUCTIVE,
ELASTOMER IS LOCATED BETWEEN THE BRAID LAYERS.
END CONNECTIONS: HANDWHEEL OR HEX CONNECTOR, NIPPLE AND CLAMP ARE
MANUFACTURED FROM TYPE 18-8 STAINLESS STEEL AND ON GROUNDED ASSEMBLIES,
CONNECTED TO THE HOSE IN A MANNER THAT ELECTRICALLY GROUNDS BOTH END CONNECTIONS
TOGETHER CREATING A STATIC FREE ASSEMBLY.
WORKING PRESSURE: EACH HOSE ASSEMBLY IS HYDROSTATICALLY TESTED TO 3000
PSI FOR A WORKING PRESSURE OF 1500 PSI.
PERFORMANCE FEATURES:
HANDWHEEL CONNECTIONS ARE DESIGNED TO BE HAND TIGHTENED TO PRODUCE A BUBBLE
TIGHT, ELECTRICALLY GROUNDED CONNECTION (FOR GROUNDED ASSEMBLIES) WHEN CONNECTED
TO HMI 219 SERIES NEEDLE VALVES OR HMI 219 SERIES ADAPTERS OR EQUIVALENT.
WILL NOT SWELL OR DEGRADE IN CONTACT WITH LPG, OILS AND MANY CHEMICALS.
LIGHTER WEIGHT APPROXIMATELY ½ OF COMPARABLE RUBBER WIRE HOSE.
MAXIMUM SERVICE TEMPERATURE 200* F. (93*C) MINIMUM 0*F (-18*C)
DISSIPATES STATIC CHARGE
STOCKED IN LENGTHS OF 24’, 36”, 48”, 60”, AND 72”. CUSTOM LENGTHS ALSO AVAILABLE